Stp Timer Forward-Delay - HP 6125XLG Command Reference Manual

Syntax
stp tc-restriction
undo stp tc-restriction
Default
TC-BPDU transmission restriction is disabled.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Usage guidelines
When TC-BPDU transmission restriction is enabled on a port, the port does not send TC-BPDUs to the
other ports, and it does not delete the MAC address entries.
When the setting is configured in Ethernet interface view, it takes effect on only that interface.
When the setting is configured in aggregate interface view, it takes effect on only the aggregate
interface.
When the setting is configured on a member port in an aggregation group, it takes effect only after the
port leaves the aggregation group.
Examples
# Enable TC-BPDU transmission restriction on FortyGigE 1/1/1.
<Sysname> system-view
[Sysname] interface fortygige 1/1/1
[Sysname-FortyGigE1/1/1] stp tc-restriction

stp timer forward-delay

Use stp timer forward-delay to set the forward delay timer of the device.
Use undo stp timer forward-delay to restore the default.
Syntax
stp timer forward-delay time
undo stp timer forward-delay
Default
The forward delay timer is 1500 centiseconds.
Views
System view
Predefined user roles
network-admin
Parameters
time: Sets the forward delay in centiseconds, in the range of 400 to 3000 in increments of 100 (as in
400, 500, 600).
133