Setting User Group Password Control Parameters; Setting Local User Password Control Parameters - HP 6125G Configuration Manual

Step
9. Set the number of days during
which the user is warned of
the pending password
expiration.
10. Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
11. Set the authentication timeout
time.
12. Set the maximum account idle
time.
NOTE:
The specified action to be taken after a user fails to log in for the specified number of attempts takes effect
immediately, and can thus affect the users already in the password control blacklist. Other password
control configurations take effect only for users logging in later and passwords configured later.

Setting user group password control parameters

Step
1. Enter system view.
2. Create a user group and enter
user group view.
3. Configure the password
aging time for the user group.
4. Configure the minimum
password length for the user
group.
5. Configure the password
composition policy for the
user group.

Setting local user password control parameters

Step
1. Enter system view.
2. Create a local user and enter
local user view.
Command
password-control
alert-before-expire alert-time
password-control
expired-user-login delay delay
times times
password-control
authentication-timeout
authentication-timeout
password-control login idle-time
idle-time
Command
system-view
user-group group-name
password-control aging aging-time
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
Command
system-view
local-user user-name
142
Remarks
Optional.
7 days by default.
Optional.
By default, a user can log in three
times within 30 days after the
password expires.
Optional.
60 seconds by default.
Optional.
90 days by default.
Remarks
N/A
N/A
Optional
By default, the password aging
time configured in system view is
used.
Optional
By default, the minimum password
length configured in system view is
used.
Optional
By default, the password
composition policy configured in
system view is used.
Remarks
N/A
N/A