Ssh Client Configuration Examples; When Switch Acts As Client For Password Authentication - HP 6125G Configuration Manual

Figure 57 Specifying the private key file
Click Open to connect to the server.
e.
If the connection is normal, you will be prompted to enter the username. After entering the
username (client002), you can enter the configuration interface of the server.

SSH client configuration examples

When switch acts as client for password authentication

Network requirements
As shown in
B (the SSH server) through the SSH protocol. Configure the username client001 and the password aabbcc
for the SSH client on Switch B.
Figure 58 Network diagram
Configuration procedure
Configure the SSH server:
1.
# Generate the RSA key pairs.
<SwitchB> system-view
Figure 58, Switch A (the SSH client) must pass password authentication to log in to Switch
195