Setting Super Password Control Parameters - HP 6125G Configuration Manual

Step
3. Configure the password
aging time for the local user.
4. Configure the minimum
password length for the local
user.
5. Configure the password
composition policy for the
local user.

Setting super password control parameters

CLI commands fall into four levels: visit, monitor, system, and manage, in ascending order. Accordingly,
login users fall into four levels, each corresponding to a command level. A user of a certain level can only
use the commands at that level or lower levels.
To switch from a lower user level to a higher one, a user needs to enter a password for authentication.
This password is called a super password. For more information on super passwords, see Fundamentals
Configuration Guide.
To set super password control parameters:
Step
1. Enter system view.
2. Set the password aging time
for super passwords.
3. Configure the minimum length
for super passwords.
4. Configure the password
composition policy for super
passwords.
Command
password-control aging aging-time
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
Command
system-view
password-control super aging
aging-time
password-control super length
length
password-control super
composition type-number
type-number [ type-length
type-length ]
143
Remarks
Optional
By default, the setting for the user
group to which the local user
belongs is used; if no aging time is
configured for the user group, the
setting in system view is used.
Optional
By default, the setting for the user
group to which the local user
belongs is used; if no minimum
password length is configured for
the user group, the setting in
system view is used.
Optional
By default, the settings for the user
group to which the local user
belongs are used; if no password
composition policy is configured
for the user group, the settings in
system view are used.
Remarks
N/A
Optional.
By default, the global password
aging time is used.
Optional.
By default, the global minimum
password length is used.
Optional.
By default, the global password
composition restriction settings are
used.