Setting User Group Password Control Parameters - HP 10500 Series Configuration Manual

Step
5. Configure the password
composition policy.
6. Configure the password
complexity checking policy.
7. Set the maximum number of
history password records for
each user.
8. Specify the maximum number
of login attempts and the
action to be taken when a
user fails to log in after the
specified number of attempts.
9. Set the number of days during
which the user is warned of
the pending password
expiration.
10. Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
11. Set the authentication timeout
time.
Set the maximum account idle
12.
time.

Setting user group password control parameters

Step
1. Enter system view.
2. Create a user group and enter
user group view.
Command
password-control composition
type-number type-number
[ type-length type-length ]
password-control complexity
{ same-character | user-name }
check
password-control history
max-record-num
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
password-control
alert-before-expire alert-time
password-control
expired-user-login delay delay
times times
password-control
authentication-timeout
authentication-timeout
password-control login idle-time
idle-time
Command
system-view
user-group group-name
289
Remarks
Optional.
•
In non-FIPS mode:
By default, a password must
contain at least one type of
characters and each type must
contain at least one character.
•
In FIPS mode:
By default, a password must
contain four types of characters
and each type must contain at
least one character.
Optional.
By default, the system does not
perform password complexity
checking.
Optional.
The default setting is 4.
Optional.
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for
one minute before trying again.
Optional.
The default setting is 7 days.
Optional.
By default, a user can log in three
times within 30 days after the
password expires.
Optional.
The default setting is 60 seconds.
Optional.
The default setting is 90 days.
Remarks
N/A
N/A