Setting A Local User Password In Interactive Mode; Displaying And Maintaining Password Control; Password Control Configuration Example - HP 6125G Configuration Manual

Setting a local user password in interactive mode

You can set a password for a local user in interactive mode. When doing so, you need to confirm the
password.
To set a password for a local user in interactive mode:
Step
1. Enter system view.
2. Create a local user and enter local user view.
3. Set the password for the local user in interactive
mode.

Displaying and maintaining password control

Task
Display password control
configuration information.
Display information about users in
the password control blacklist.
Delete users from the password
control blacklist.
Clear history password records.
NOTE:
The reset password-control history-record command can delete the history password records of a
specific user or all users even when the password history function is disabled.

Password control configuration example

Network requirements
Implementing the following global password control policy:
An FTP or VTY user failing to provide the correct password in two successive login attempts is
•
permanently prohibited from logging in.
• A user can log in five times within 60 days after the password expires.
The password aging time is 30 days.
•
The minimum password update interval is 36 hours.
•
The maximum account idle time is 30 days.
•
Command
system-view
local-user user-name
password
Command
display password-control [ super ]
[ | { begin | exclude | include }
regular-expression ]
display password-control blacklist
[ user-name name | ip
ipv4-address | ipv6 ipv6-address ]
[ | { begin | exclude | include }
regular-expression ]
reset password-control blacklist
[ user-name name ]
reset password-control
history-record [ user-name name |
super [ level level ] ]
144
Remarks
Available in any view
Available in any view
Available in user view
Available in user view