HP 6125G Configuration Manual page 29

By default, every newly added local user belongs to the system default user group system and bears all
attributes of the group. To change the user group to which a local user belongs, use the user-group
command in local user view.
To configure attributes for a user group:
Step
1. Enter system view.
2. Create a user group and enter
user group view.
3. Configure password control
attributes for the user group.
4. Configure the authorization
attributes for the user group.
5. Set the guest attribute for the
user group.
NOTE:
For more information about password control attributes configuration commands, see
Reference
.
Displaying and maintaining local users and local user groups
Task
Display local user information
Display the user group configuration
information.
Command
system-view
user-group group-name
•
Set the password aging time:
password-control aging
aging-time
•
Set the minimum password
length:
password-control length length
•
Configure the password
composition policy:
password-control composition
type-number type-number
[ type-length type-length ]
authorization-attribute { acl
acl-number | idle-cut minute | level
level | user-profile profile-name |
vlan vlan-id | work-directory
directory-name } *
group-attribute allow-guest
Command
display local-user [ idle-cut { disable |
enable } | service-type { ftp |
lan-access | ssh | telnet | terminal |
web } | state { active | block } |
user-name user-name | vlan vlan-id ]
[ slot slot-number ] [ | { begin | exclude
| include } regular-expression ]
display user-group [ group-name ] [ |
{ begin | exclude | include }
regular-expression ]
19
Remarks
N/A
N/A
Optional.
By default, the global settings
apply. The global settings include
a 90-day password aging time, a
minimum password length of 10
characters, and at least one
password composition type and at
least one character required for
each password composition type.
Optional.
By default, no authorization
attribute is configured for a user
group.
Optional.
By default, the guest attribute is not
set for a user group, and guest
users created by a guest manager
through the Web interface cannot
join the group.
Security Command
Remarks
Available in any view
Available in any view