Configuring Hwtacacs Schemes - HP 6125G Configuration Manual

To set the DSCP value for RADIUS protocol packets:
Step
1. Enter system view.
2. Set the DSCP value for IPv4
RADIUS protocol packets.
3. Set the DSCP value for IPv6
RADIUS protocol packets.
Displaying and maintaining RADIUS
Task
Display the configuration information
of RADIUS schemes
Display the statistics for RADIUS
packets.
Display information about buffered
stop-accounting requests for which no
responses have been received
Clear RADIUS statistics
Clear the buffered stop-accounting
requests for which no responses have
been receive.

Configuring HWTACACS schemes

NOTE:
You cannot remove the HWTACACS schemes in use or change the IP addresses of the HWTACACS
servers in use.
HWTACACS configuration task list
Task
Creating an HWTACACS scheme
Command
system-view
radius dscp dscp-value
radius ipv6 dscp dscp-value
Command
display radius scheme
[ radius-scheme-name ] [ slot
slot-number ] [ | { begin | exclude |
include } regular-expression ]
display radius statistics [ slot
slot-number ] [ | { begin | exclude |
include } regular-expression ]
display stop-accounting-buffer
{ radius-scheme radius-scheme-name |
session-id session-id | time-range
start-time stop-time | user-name
user-name } [ slot slot-number ] [ |
{ begin | exclude | include }
regular-expression ]
reset radius statistics [ slot slot-number ]
reset stop-accounting-buffer
{ radius-scheme radius-scheme-name |
session-id session-id | time-range
start-time stop-time | user-name
user-name } [ slot slot-number ]
31
Remarks
N/A
Optional.
By default, the DSCP value in IPv4
RADIUS protocol packets is 0.
Optional.
By default, the DSCP value in IPv6
RADIUS protocol packets is 0.
Remarks
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view
Remarks
Required