With Acl Assignment Configuration Example; Network Requirements; Configuration Procedure - HP 6125G Configuration Manual

802.1X with ACL assignment configuration
example

Network requirements

As shown in
access device.
Perform 802.1X authentication on the port. Use the RADIUS server at 10.1.1.1 as the authentication and
authorization server and the RADIUS server at 10.1.1.2 as the accounting server. Assign an ACL to
GigabitEthernet 1/0/1 to deny the access of 802.1X users to the FTP server at 10.0.0.1/24 on weekdays
during business hours from 8:00 to 18:00.
Figure 35 Network diagram
Host
192.168.1.10/24

Configuration procedure

The following configuration procedure provides the major AAA and RADIUS configuration on the access
device. The configuration procedures on the 802.1X client and RADIUS server are beyond the scope of
this configuration example. For information about AAA and RADIUS configuration commands, see
Security Command Reference.
Configure 802.1X client. Make sure the client is able to update its IP address after the access port
1.
is assigned to the 802.1X guest VLAN or a server-assigned VLAN. (Details not shown.)
Configure the RADIUS servers, user accounts, and authorization ACL, ACL 3000 in this example.
2.
(Details not shown.)
Configure the access device:
3.
# Assign IP addresses to interfaces. (Details not shown.)
# Configure the RADIUS scheme.
<Device> system-view
[Device] radius scheme 2000
[Device-radius-2000] primary authentication 10.1.1.1 1812
[Device-radius-2000] primary accounting 10.1.1.2 1813
[Device-radius-2000] key authentication abc
[Device-radius-2000] key accounting abc
[Device-radius-2000] user-name-format without-domain
[Device-radius-2000] quit
Figure 35, the host at 192.168.1.10 connects to port GigabitEthernet 1/0/1 of the network
RADIUS server cluster
GE1/0/2
GE1/0/3
GE1/0/1
Vlan-int2
192.168.1.1/24
Device
Auth: 10.1.1.1
Acct: 10.1.1.2
Internet
96
FTP server
10.0.0.1/24