Configuring Radius Schemes - HP 6125G Configuration Manual

Configuring RADIUS schemes

A RADIUS scheme specifies the RADIUS servers that the switch can cooperate with and defines a set of
parameters that the switch uses to exchange information with the RADIUS servers. There may be
authentication/authorization servers and accounting servers, or primary servers and secondary servers.
The parameters include the IP addresses of the servers, the shared keys, and the RADIUS server type.
RADIUS scheme configuration task list
Task
Creating a RADIUS scheme
Specifying the RADIUS authentication/authorization servers
Specifying the RADIUS accounting servers and the relevant parameters
Specifying the shared keys for secure RADIUS communication
Specifying the VPN to which the servers belong
Setting the username format and traffic statistics units
Setting the supported RADIUS server type
Setting the maximum number of RADIUS request transmission attempts
Setting the status of RADIUS servers
Specifying the source IP address for outgoing RADIUS packets
Setting timers for controlling communication with RADIUS servers
Configuring RADIUS accounting-on
Configuring the IP address of the security policy server
Configuring interpretation of RADIUS class attribute as CAR parameters
Enabling the trap function for RADIUS
Enabling the RADIUS listening port of the RADIUS client
Setting the DSCP value for RADIUS protocol packets
Displaying and maintaining RADIUS
Creating a RADIUS scheme
Before performing other RADIUS configurations, follow these steps to create a RADIUS scheme and enter
RADIUS scheme view:
Step
1. Enter system view.
2. Create a RADIUS scheme and
enter RADIUS scheme view.
NOTE:
A RADIUS scheme can be referenced by multiple ISP domains at the same time.
Command
system-view
radius scheme
radius-scheme-name
20
Remarks
Required
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Remarks
N/A
No RADIUS scheme exists by
default.