Configuring Arp Restricted Forwarding; Displaying And Maintaining Arp Detection - HP 6125G Configuration Manual

Step
1. Enter system view.
2. Enter VLAN view.
3. Enable ARP detection for the
VLAN.
4. Return to system view.
5. Enable ARP packet validity
check and specify the objects to
be checked.
6. Enter Layer 2 Ethernet
port/Layer 2 aggregate
interface view.
7. Configure the port as a trusted
port on which ARP detection
does not apply.

Configuring ARP restricted forwarding

ARP restricted forwarding controls the forwarding of ARP packets that are received on untrusted ports
and have passed ARP detection in the following cases:
If the packets are ARP requests, they are forwarded through the trusted ports.
•
• If the packets are ARP responses, they are forwarded according to their destination MAC address.
If no match is found in the MAC address table, they are forwarded through the trusted ports.
Before performing the following configuration, make sure you have configured the arp detection enable
command.
To enable ARP restricted forwarding:
Step
1. Enter system view.
2. Enter VLAN view.
3. Enable ARP restricted forwarding.

Displaying and maintaining ARP detection

Task
Display the VLANs enabled
with ARP detection.
Display the ARP detection
statistics.
Clear the ARP detection
statistics.
Command
system-view
vlan vlan-id
arp detection enable
quit
arp detection validate { dst-mac | ip |
src-mac } *
interface interface-type
interface-number
arp detection trust
Command
system-view
vlan vlan-id
arp restricted-forwarding enable
Command
display arp detection [ | { begin | exclude |
include } regular-expression ]
display arp detection statistics [ interface
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
reset arp detection statistics [ interface
interface-type interface-number ]
243
Remarks
N/A
N/A
Disabled by default.
N/A
Disabled by default.
N/A
Optional.
The port is an untrusted port
by default.
Remarks
N/A
N/A
Disabled by default
Remarks
Available in any view
Available in any view
Available in user view