HP 6125G Configuration Manual page 122

# Enable MAC authentication for port GigabitEthernet 1/0/1.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-authentication
Configure the RADIUS servers:
4.
# Add a user account with 00-e0-fc-12-34-56 as both the username and password on the RADIUS
server, and specify ACL 3000 as the authorization ACL for the user account. (Details not shown.)
Verifying the configuration
After the host passes authentication, perform the display connection command on the device to view
online user information.
[Sysname-GigabitEthernet1/0/1] display connection
Slot: 1
Index=9
IP=N/A
IPv6=N/A
MAC=00e0-fc12-3456
Total 1 connection(s) matched on slot 1.
Total 1 connection(s) matched.
Ping the FTP server from the host to verify that the ACL 3000 has been assigned to port GigabitEthernet
1/0/1 to deny access to the FTP server.
C:\>ping 10.0.0.1
Pinging 10.0.0.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 10.0.0.1:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
, Username=00-e0-fc-12-34-56@2000
112