HP 6125G Configuration Manual page 119

Perform MAC authentication on port GigabitEthernet 1/0/1 to control Internet access. Make sure that:
• The device detects whether a user has gone offline every 180 seconds. If a user fails authentication,
the device does not authenticate the user within 180 seconds.
All MAC authentication users belong to ISP domain 2000 and share the user account aaa with
•
password 123456.
Figure 38 Network diagram
Host
Configuration procedure
Make sure the RADIUS server and the access device can reach each other.
1.
Create a shared account for MAC authentication users on the RADIUS server, and set the
2.
username aaa and password 123456 for the account.
Configure the device:
3.
# Configure a RADIUS scheme.
<Device> system-view
[Device] radius scheme 2000
[Device-radius-2000] primary authentication 10.1.1.1 1812
[Device-radius-2000] primary accounting 10.1.1.2 1813
[Device-radius-2000] key authentication abc
[Device-radius-2000] key accounting abc
[Device-radius-2000] user-name-format without-domain
[Device-radius-2000] quit
# Apply the RADIUS scheme to ISP domain 2000 for authentication, authorization, and
accounting.
[Device] domain 2000
[Device-isp-2000] authentication default radius-scheme 2000
[Device-isp-2000] authorization default radius-scheme 2000
[Device-isp-2000] accounting default radius-scheme 2000
[Device-isp-2000] quit
# Enable MAC authentication globally.
[Device] mac-authentication
# Enable MAC authentication on port GigabitEthernet 1/0/1.
[Device] mac-authentication interface gigabitethernet 1/0/1
# Specify the ISP domain for MAC authentication.
[Device] mac-authentication domain 2000
# Set the MAC authentication timers.
RADIUS servers
Auth:10.1.1.1
Acct:10.1.1.2
GE1/0/1
Device
IP network
109