Setting User Group Password Control Parameters; Setting Local User Password Control Parameters - HP 12500 Series Configuration Manual

10. Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
11. Set the authentication timeout
time.
12. Set the maximum account idle
time.

Setting user group password control parameters

Step
1. Enter system view.
2. Create a user group and enter
user group view.
3. Configure the password
aging time for the user group.
4. Configure the minimum
password length for the user
group.
5. Configure the password
composition policy for the
user group.

Setting local user password control parameters

Step
1. Enter system view.
2. Create a local user and enter
local user view.
3. Configure the password
aging time for the local user.
password-control
expired-user-login delay delay
times times
password-control
authentication-timeout
authentication-timeout
password-control login idle-time
idle-time
Command
system-view
user-group group-name
password-control aging aging-time
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
Command
system-view
local-user user-name
password-control aging aging-time
150
Optional.
By default, a user can log in three
times within 30 days after the
password expires.
Optional.
The default setting is 60 seconds.
Optional.
The default setting is 90 days.
Remarks
N/A
N/A
Optional.
By default, the aging time of the
user group is the same as the
global password aging time.
Optional.
By default, the minimum password
length of the user group is the same
as the global minimum password
length.
Optional.
By default, the password
composition policy of the user
group is the same as the global
password composition policy.
Remarks
N/A
N/A
Optional.
By default, the setting equals that
for the user group to which the
local user belongs. If no aging time
is configured for the user group,
the global setting applies to the
local user.