2Nd Transfer (Belt To Paper) - Dell 3010CN Service Manual

1.3.7 2nd transfer (belt to paper)

In the "2nd transfer" process, completed toner image formed on the belt surface is transferred to
paper by the 2nd BTR (Second bias Transfer Roll).
2nd BTR contacts only at transferring to paper so that the toner image being formed on belt
surface is not damaged. It is normally at home position of 2nd BTR, and home position is
detected by 2nd BTR Retract Sensor. The contact point with paper is moved by drive from the
2nd BTR Retract Motor.
2nd BTR Retract Sensor
6 - 11
Chapter 6 Principle s of O peration
2nd BTR 2nd BTR Retract Motor
Leg_Sec06_026FA