Table of Contents
Advertisement
RRP14.29 CHUTE ASSY RETARD (REFERENCE ONLY)
[Removal]
1)
Remove 500 SHEET PAPER TRAY. (RRP 14.1)
2)
Remove 500 SHEET FEEDER RIGHT COVER. (RRP 14.8)
3)
Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
4)
Remove 500 SHEET FEEDER CHUTE ASSEMBLY. (RRP 14.7)
5)
Remove CLUTCH ASSY PH. (RRP 14.11)
6)
Remove DRIVE ASSY FEED. (RRP 14.9)
7)
Remove HOUSING ASSY FEED. (RRP 14.18)
8)
Remove two screws (silver, tap, 8mm) that fix CHUTE ASSY RETARD to 500 SHEET
FEEDER ASSEMBLY.
9)
Remove s screw (silver, 6mm) that fix BRACKET MAG R (PL 14.3.43) to 500 SHEET
FEEDER ASSEMBLY.
10) Remove BRACKET MAG R from 500 SHEET FEEDER ASSEMBLY.
11) Remove the right side shaft of CHUTE ASSY RETARD from the bearing of GUIDE CST R (PL
14.3.29).
12) Remove the left side shaft of CHUTE ASSY RETARD from the bearing of GUIDE CST L (PL
14.3.30), remove CHUTE ASSY RETARD from 500 SHEET FEEDER ASSEMBLY.
[Replacement]
1)
Attach the left side shaft of CHUTE ASSY RETARD to the bearing of GUIDE CST L (PL
14.3.30).
2)
Attach the right side shaft of CHUTE ASSY RETARD to the bearing of GUIDE CST R (PL
14.3.29), attach CHUTE ASSY RETARD to 500 SHEET FEEDER ASSEMBLY.
3)
Put BRACKET MAG R (PL 14.3.43) in the notch of 500 SHEET FEEDER ASSEMBLY, match
the hole of BRACKET MAG R to the boss of 500 SHEET FEEDER ASSEMBLY and attach
BRACKET MAG R.
4)
Fix BRACKET MAG R to 500 SHEET FEEDER ASSEMBLY using a screw (silver, 6mm).
5)
Fix CHUTE ASSY RETARD to 500 SHEET FEEDER ASSEMBLY using two screws (silver,
tap, 8mm).
6)
Attach HOUSING ASSY FEED. (RRP 14.18)
7)
Attach DRIVE ASSY FEED. (RRP 14.9)
8)
Attach CLUTCH ASSY PH. (RRP 14.11)
9)
Attach 500 SHEET FEEDER CHUTE ASSEMBLY. (RRP 14.7)
10) Attach 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
11) Attach 500 SHEET FEEDER RIGHT COVER. (RRP 14.8).
12) Attach 500 SHEET PAPER TRAY. (RRP 14.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 358
Advertisement
Chapters
Table of Contents
