Table of Contents
Advertisement
RRP14.2 GUIDE END ASSY (PL 14.1.2)
[Removal]
1)
Remove 500 SHEET PAPER TRAY. (RRP 14.1)
2)
Remove PLATE ASSY BOTTOM. (RRP 14.3)
3)
Slide GUIDE END ASSY (PL 14.1.2) to rear side, match the convex at four locations on
GUIDE END ASSY to the notched of CASSETTE 500 (PL 14.1.15) and remove it upwards.
[Replacement]
1)
Match the convex at four locations on GUIDE END ASSY to the notched of CASSETTE 500
and attach it.
2)
Slide GUIDE END ASSY to front side and insert the convex of GUIDE END ASSY in the
groove of PLATE SLIDE 500.
3)
Attach PLATE ASSY BOTTOM. (RRP 14.3)
4)
Attach 500 SHEET PAPER TRAY. (RRP 14.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 297
Advertisement
Chapters
Table of Contents
