Table of Contents
Advertisement
RRP6.7
FUSER CHUTE INTERLOCK (PL 6.1.15)
[Removal]
1)
Remove FUSER CHUTE ASSEMBLY, BIAS TRANSFER ROLL(BTR) COVER. (RRP 6.1)
2)
Remove the connector (P/J113) of FUSER CHUTE INTERLOCK (PL 6.1.15).
3)
Remove a screw (silver, tap, 6mm) that fixes BRACKET-SWITCH 2ND (PL 6.1.14) to COVER-
RR 2ND (PL 6.1.16).
4)
Remove BRACKET-SWITCH 2ND from COVER-RR 2ND together with FUSER CHUTE
INTERLOCK.
5)
Release the two hooks that fix FUSER CHUTE INTERLOCK to BRACKET-SWITCH 2ND
and remove FUSER CHUTE INTERLOCK.
[Replacement]
1)
Match the hooks of FUSER CHUTE INTERLOCK to the fitting position and attach it to
BRACKET-SWITCH 2ND.
2)
Match the hole in BRACKET-SWITCH 2ND to the boss of COVER-RR 2ND and attach it
together with FUSER CHUTE INTERLOCK.
3)
Fix BRACKET-SWITCH 2ND to COVER-RR 2ND using a screw (silver, tap, 6mm).
4)
Attach the connector (P/J113) of FUSER CHUTE INTERLOCK.
5)
Attach FUSER CHUTE ASSEMBLY, BIAS TRANSFER ROLL(BTR) COVER. (RRP 6.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 201
Advertisement
Chapters
Table of Contents
