Clutch and Solenoid name
(Diag. Code)
Sensor ADC Solenoid
Release (DO-1d)
NOTE: If the solenoid noise is not heard, execute the DO-1c.
This procedure is for the technical staff. The customer's
procedure is the 1, 5 and 6.
1)
Turn on the power and enter the Diagnostic Mode.
2)
Open the Front door and the Top Cover, and then remove the
IBT.
3)
Cheat the safety Interlock System.
4)
Execute the DO-1d. Upon hitting the "
noise of the solenoid will be heard.
5)
Press the "Cancel" key to stop test.
6)
Remove the cheater and reseat the IBT.
7)
Close the Top Cover and the Front Door.
2 - 52
Chapter 2 Operation of Diag.
Confirmation procedure
SHUTTER
" key, the operating
Leg_Sec02_054FA