Clutch and Solenoid name
(Diag. Code)
Pre-Regi Clutch (DO-51)
1)
Execute the DO-51. Upon hitting the "
noise of the clutch will be heard.
2)
Press the "Cancel" key to stop test.
Combination test is as follows.
NOTE: The pre-regi roll rotates when the DO-51 and the DO-64
are executed. This procedure is for the technical staff.
1)
Turn on the power and enter the Diagnostic Mode..
2)
Open the Inner Rear Cover.
3)
Cheat the Safety Interlock System and the PH Door Switch.
4)
Execute the DO-51 and the DO-64. Confirm the rotation of the
Pre-Regi Roll.
5)
Press the "Cancel" key to stop the motor.
6)
Press the "
" key to display the DO-51.
7)
Press the "Cancel" key to stop the clutch.
8)
Remove the cheaters and close the Inner Rear Cover.
2 - 55
Chapter 2 Operation of Diag.
Confirmation procedure
Pre Regi Roll
" key, the operating
Leg_Sec02_057FA