Table of Contents
Advertisement
RRP2.3
PLATE ASSY BOTTOM 250 (PL 2.1.3)
[Removal]
1)
Remove 250 SHEET PAPER TRAY. (RRP 2.1)
2)
Slide LOCK LIFT R (PL 2.1.10) and LOCK LIFT L (PL 2.1.15) to release lock.
3)
Release a hook of ROLL LINK (PL 2.1.11) fixed on the shaft of PLATE ASSY BOTTOM 250
(PL 2.1.3) on both right and left sides, and remove ROLL LINK, LOCK LIFT R and LOCK
LIFT L.
4)
Remove four screws (silver, tap, 6mm) that fix right and left sides of PLATE ROLL STOPPER
250 (PL 2.1.9) on 250 SHEET PAPER TRAY (PL 2.1.1).
5)
Remove the convex of PLATE ROLL STOPPER 250 from the hole of 250 SHEET PAPER
TRAY, and remove the right and left sides of PLATE ROLL STOPPER 250.
6)
Push the hooks at two locations of CASSETTE 250 (PL 2.1.12) to release the front side of
PLATE ASSY BOTTOM 250.
7)
Remove the convex of PLATE ASSY BOTTOM 250 from the concave of PLATE SLIDE 250 (PL
2.1.14).
8)
Pull out the shaft of PLATE ASSY BOTTOM 250 upward from the notched of CASSETTE 250
on borth right and left sides.
[Replacement]
1)
Match the boss part on the rear side of PLATE ASSY BOTTOM 250 to SPRING NF 250 (PL
2.1.8).
Check that boss part on the rear side of PLATE ASSY BOTTOM 250 is engaged in
SPRING NF 250.
2)
Put the shaft of PLATE ASSY BOTTOM 250 to the notched of CASSETTE 250 on both right
and left sides and attach it.
3)
Attach the convex of PLATE ASSY BOTTOM 250 to the concave of PLATE SLIDE 250 and fix
the front of PLATE ASSY BOTTOM 250 using the hooks at two locations of CASSETTE 250.
Convex of PLATE ASSY BOTTOM 250 should be engaged in the concave of PLATE
SLIDE 250.
4)
Match the convex of PLATE ROLL STOPPER 250 to the hole of 250 SHEET PAPER TRAY
and attach the right and left sides of PLATE ROLL STOPPER 250.
5)
Fix the right and left of PLATE ROLL STOPPER 250 to 250 SHEET PAPER TRAY using the
four screws (silver, tap, 6mm).
6)
Attach LOCK LIFT R, LOCK LIFT L and ROLL LINK on the shaft of PLATE ASSY BOTTOM
250 on both right and left sides, and fix a hook of ROLL LINK in the groove in shaft of PLATE
ASSY BOTTOM 250.
7)
Push PLATE ASSY BOTTOM 250 to lock LOCK LIFT R and LOCK LIFT L.
8)
Attach 250 SHEET PAPER TRAY. (RRP 2.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 56
Advertisement
Chapters
Table of Contents
