Table of Contents
Advertisement
RRP4.2
MULTIPURPOSE ROLLER (PL 4.1.6)
[Removal]
1)
Remove VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
2)
Release the hook of the right side of the CORE (PL 4.1.5) that fixed to SHAFT ASSY MSI (PL
4.1.6) and move it to the right side.
3)
Move MULTIPURPOSE ROLLER (PL 4.1.6) to right side, remove fitting groove of
MULTIPURPOSE ROLLER from pin of SHAFT ASSY MSI and remove MULTIPURPOSE
ROLLER from SHAFT ASSY MSI.
[Replacement]
Pay attention to fitting direction of MULTIPURPOSE ROLLER. (The arrow mark printed
on MULTIPURPOSE ROLLER. Refer to an illustration and attach it.)
1)
Place the U-cut section of MULTIPURPOSE ROLLER on SHAFT ASSY MSI and move it to
left side, insert the positioning pin of SHAFT ASSY MSI in the notched of MULTIPURPOSE
ROLLER and attach MULTIPURPOSE ROLLER to SHAFT ASSY MSI.
2)
Move the right side of CORE to the left and fix a hook of CORE to the groove of SHAFT ASSY
MSI.
3)
Attach VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 125
Advertisement
Chapters
Table of Contents
