Table of Contents
Advertisement
RRP15.3 PLATE ASSY BOTTOM 250 (PL 15.1.3)
[Removal]
1)
Remove LEGAL PAPER CASSETTE ASSY. (RRP 15.1)
2)
Slide LOCK LIFT R (PL 15.1.10) and LOCK LIFT L (PL 15.1.15) to release lock.
3)
Release a hook of ROLL LINK (PL 15.1.11) fixed on the shaft of PLATE ASSY BOTTOM 250
(PL 15.1.3) on both right and left sides, and remove ROLL LINK, LOCK LIFT R and LOCK
LIFT L.
4)
Remove four screws (silver, tap, 6mm) that fix right and left side of PLATE ROLL STOPPER
250 (PL 15.1.9) on LEGAL PAPER CASSETTE ASSY (PL 15.1.1).
5)
Remove the convex of PLATE ROLL STOPPER 250 from the hole of LEGAL PAPER
CASSETTE ASSY, and remove the right and left side of PLATE ROLL STOPPER 250.
6)
Push the hooks at two locatins of CASSETTE 250 LG (PL 15.1.12), release the front side of
PLATE ASSY BOTTOM 250.
7)
Remove the convex of PLATE ASSY BOTTOM 250 from the concave of PLATE SLIDE LG (PL
15.1.14).
8)
Pull out the shaft of PLATE ASSY BOTTOM 250 upward from the notched of CASSETTE 250
LG on both right and left sides, remove PLATE ASSY BOTTOM 250.
[Replacement]
1)
Match the boss part on the rear side of PLATE ASSY BOTTOM 250 to SPRING NF 250 (PL
15.1.8).
Check that the boss part on the rear side of PLATE ASSY BOTTOM 250 is engaged in
SPRING NF 250.
2)
Put the shaft of PLATE ASSY BOTTOM 250 to the notched of CASSETTE 250 LG on both
right and left sides and attach it.
3)
Attach the convex of PLATE ASSY BOTTOM 250 to the concave of PLATE SLIDE LG and fix
the front of PLATE ASSY BOTTOM 250 using the hooks at two locations of CASSETTE 250
LG.
Convex of PLATE ASSY BOTTOM 250 should be engaged in the concave of PLATE
SLIDE LG.
4)
Match the convex of PLATE ROLL STOPPER 250 to the hole of LEGAL PAPER CASSETTE
ASSY and attach the right and left side of PLATE ROLL STOPPER 250.
5)
Fix the right and left of PLATE ROLL STOPPER 250 to LEGAL PAPER CASSETTE ASSY
using the four screws (silver, tap, 6mm).
6)
Attach LOCK LIFT R, LOCK LIFT L and ROLL LINK on the shaft of PLATE ASSY BOTTOM
250 on both right and left sides, and fix a hook of ROLL LINK in the groove of shaft of PLATE
ASSY BOTTOM 250.
7)
Push PLATE ASSY BOTTOM 250 to lock LOCK LIFT R and LOCK LIFT L.
8)
Attach LEGAL PAPER CASSETTE ASSY. (RRP 15.1)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 368
Advertisement
Chapters
Table of Contents
