Dell 3010CN Service Manual page 427

RRP14.17 HARNESS-ASSY FEED 2 (PL 14.3.13)
[Removal]
1) Remove 500 SHEET FEEDER ASSEMBLY. (RRP 14.5)
2) Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
3) Release the two clamps that fixes the harness of HARNESS-ASSY FEED 2 (PL 14.3.13).
4) Remove the connector (P/J436) on PWBA TRAY CONT (PL 14.3.12).
5) Release the hooks at two locations that fix HARNESS-ASSY FEED 2 to 500 SHEET FEEDER
ASSEMBLY, and remove HARNESS-ASSY FEED 2.
[Replacement]
1) Attach HARNESS-ASSY FEED 2 on 500 SHEET FEEDER ASSEMBLY and fix it with two
hooks.
2) Attach the connector (P/J436) on PWBA-TRAY CONT.
3) Fix the harness of HARNESS-ASSY FEED 2 using the two clamps.
4) Attach 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
5) Attach 500 SHEET FEEDER ASSEMBLY. (RRP 14.5)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 329