Table of Contents
Advertisement
RRP1.5
TOP COVER INTERLOCK (PL 1.1.7)
[Removal]
1)
Remove COVER ASSY RH. (RRP 1.12)
When carrying out the work shown below, leave the relay connector on the harness side.
2)
Release the clamp at two locations that fix the harness of TOP COVER INTERLOCK (PL
1.1.7) and remove the harness.
3)
Remove connector (P/J116) of TOP COVER INTERLOCK.
4)
Remove a screw (silver, with a flange, 8mm) that fixes TOP COVER INTERLOCK on the main
unit.
5)
Remove TOP COVER INTERLOCK from the main unit.
[Replacement]
1)
Match the hole in TOP COVER INTERLOCK to the boss of the main unit and attach it.
2)
Fix TOP COVER INTERLOCK on the main unit using a screw (silver, with a flange, 8mm).
3)
Attach connector of TOP COVER INTERLOCK (P/J116).
4)
Fix the harness of TOP COVER INTERLOCK using two clamps.
5)
Attach COVER ASSY RH. (RRP 1.12)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 25
Advertisement
Chapters
Table of Contents
