Table of Contents
Advertisement
RRP3.11 PWBA MOT (PL 3.2.11)
[Removal]
1)
Remove 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
2)
Remove connector (P/J440) on PWBA MOT (PL 3.2.11) and connector (P/J446).
3)
Release the two clamps that fixes the harness of HARNESS-ASSY FEED 2 (PL3.2.13) and
remove the harness of HARNESS-ASSY FEED 2.
4)
Remove three screws (silver, with a flange, 6mm) that fix PWBA MOT on 250 SHEET
FEEDER ASSEMBLY.
5)
Remove PWBA MOT from 250 SHEET FEEDER ASSEMBLY.
[Replacement]
1)
Match the notch of the lower right of PWBA MOT to the convex part of 250 SHEET FEEDER
ASSEMBLY, and attach it.
2)
Fix PWBA MOT on 250 SHEET FEEDER ASSEMBLY using three screws (silver, with a
flange, 6mm).
3)
Fix the harness of HARNESS ASSY FEED 2 using two clamps.
4)
Attach connector (P/J440) on PWBA MOT and connector (P/J446).
5)
Attach 250 SHEET FEEDER LEFT COVER. (RRP 3.2)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 81
Advertisement
Chapters
Table of Contents
