Table of Contents
Advertisement
RRP5.6
ROLL ASSY-REGI (PL 5.2.8)
[Removal]
1)
Remove VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
2)
Remove MOTOR-PH. (RRP 5.11)
3)
Remove GEAR ASSY DRIVE. (RRP 5.14)
4)
Remove CLUTCH ASSY PH: REGI. (RRP 5.4)
5)
Remove E ring that fixes GEAR-REGI (PL 5.2.6) on ROLL ASSY-REGI (PL 5.2.8) from
VERTICAL TRANSPORT ASSEMBLY (PL 5.2.1) and remove GEAR-REGI.
6)
Remove the right side BEARING RUBBER (PL 5.2.5) that fixes ROLL ASSY-REGI and metal-
lic color of SPRING-REGI R (METAL)(PL 5.2.7) from VERTICAL TRANSPORT ASSEMBLY.
7)
Remove the left side BEARING RUBBER that fixes ROLL ASSY-REGI and black color of
SPRING-REGI L (BLACK) (PL 5.2.9) from VERTICAL TRANSPORT ASSEMBLY.
8)
Move ROLL ASSY-REGI to left side once, pull out the shaft of ROLL ASSY-REGI from the
right side bearing of VERTICAL TRANSPORT ASSEMBLY and remove ROLL ASSY-REGI.
[Replacement]
1)
After placing the left side shaft of ROLL ASSY-REGI in the left side bearing of VERTICAL
TRANSPORT ASSEMBLY, move ROLL ASSY-REGI to right side and attach it.
2)
Fix ROLL ASSY-REGI to VERTICAL TRANSPORT ASSEMBLY using BEARING RUBBER
at right and left sides.
Be careful not to attach metallic color of SPRING-REGI R (METAL) and black color of
SPRING-REGI L (BLACK) to incorrect position when carrying out the work shown below.
3)
Attach SPRING-REGI R (METAL) to the right side boss of BEARING RUBBER that fixes
ROLL ASSY-REGI and attach SPRING-REGI R (METAL) to the right side bearing of the boss
of VERTICAL TRANSPORT ASSEMBLY.
4)
Attach SPRING-REGI L (BLACK) to the left side boss of BEARING RUBBER that fixes ROLL
ASSY-REGI and attach SPRING-REGI L (BLACK) to the left side bearing of the boss of
VERTICAL TRANSPORT ASSEMBLY.
Check that SPRING-REGI R (METAL) and SPRING-REGI L (BLACK) are placed in the
boss of BEARING RUBBER and boss of bearing of VERTICAL TRANSPORT
ASSEMBLY on both sides.
5)
Attach GEAR-REGI to the right side of shaft of ROLL ASSY-REGI and fix it using E ring.
6)
Attach CLUTCH ASSY PH: REGI. (RRP 5.4)
7)
Attach GEAR ASSY DRIVE. (RRP 5.14)
8)
Attach MOTOR-PH. (RRP 5.11)
9)
Attach VERTICAL TRANSPORT ASSEMBLY. (RRP 5.3)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 169
Advertisement
Chapters
Table of Contents
