Table of Contents
Advertisement
RRP14.13 ROLL ASSY TURN (PL 14.3.8)
[Removal]
1)
Remove 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
2)
Remove 500 SHEET FEEDER RIGHT COVER. (RRP 14.8)
3)
Remove 500 SHEET FEEDER CHUTE ASSEMBLY. (RRP 14.7)
4)
Remove CLUTCH ASSY PH. (RRP 14.11)
5)
Remove DRIVE ASSY FEED. (RRP 14.9)
6)
Remove HOUSING ASSY FEED. (RRP 14.18)
7)
Remove CHUTE ASSY RETARD. (RRP 14.29)
8)
Remove the E rings that fix both sides of the shaft of ROLL ASSY TURN (PL 14.3.8) to 500
SHEET FEEDER ASSEMBLY.
9)
Remove left and right BEARING EARTH (PL 14.3.7) that fix ROLL ASSY TURN from 500
SHEET FEEDER ASSEMBLY.
10) First slide ROLL ASSY TURN to the left, pull out the shaft of ROLL ASSY TURN from the
right side bearing of 500 SHEET FEEDER ASSEMBLY, and remove ROLL ASSY TURN.
[Replacement]
1)
After placing the left side shaft of ROLL ASSY TURN (PL 14.3.8) in the left side bearing of
500 SHEET FEEDER ASSEMBLY, slide ROLL ASSY TURN to the right and attach it.
2)
Match the double D-cut section of BEARING EARTH (PL 14.3.7) to the right and left bearing
of 500 SHEET FEEDER ASSEMBLY, attach BEARING EARTH and fix ROLL ASSY TURN.
3)
Fix both sides of the shaft of ROLL ASSY TURN to 500 PAPER FEEDR ASSY using E rings.
4)
Attach CHUTE ASSY RETARD. (RRP 14.29)
5)
Attach HOUSING ASSY FEED. (RRP 14.18)
6)
Attach DRIVE ASSY FEED. (RRP 14.9)
7)
Attach CLUTCH ASSY PH. (RRP 14.11)
8)
Attach 500 SHEET FEEDER CHUTE ASSEMBLY. (RRP 14.7)
9)
Attach 500 SHEET FEEDER RIGHT COVER. (RRP 14.8)
10) Attach 500 SHEET FEEDER LEFT COVER. (RRP 14.6)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 321
Advertisement
Chapters
Table of Contents
