Configuring Jack's Nbg-460N Vpn Settings - ZyXEL Communications NBG-4600N User Manual

Enter the IP address "2.2.2.2" in the Secure Gateway Address text box. This is
7
Jack's WAN IP address.
Select IP as the Peer ID Type. This is Jack's Local ID Type. Enter "2.2.2.2" in
8
the Peer Content text box. This is Jack's Local Content WAN IP address.
Figure 52 Tutorial: Authentication Method
Select Tunnel as the Encapsulation Mode and ESP as the IPSec Protocol.
9
10 Enter "ThisIsMySecretKey" as the Pre-Shared Key. This is the password for the
VPN tunnel that only Bob and Jack know.
11 Select 3DES as the encyption algorithm. Select the authentication algorithm as
SHA1. These algorithms are more secure.
Figure 53 Tutorial: IPSec Algorithm
12 Click Apply to save the new rule and click VPN to return to the VPN Summary
screen. The new VPN rule is displayed as shown below.
Figure 54 Tutorial: VPN Summary

5.3.2 Configuring Jack's NBG-460N VPN Settings

To configure these settings Jack uses the NBG-460N Web Configurator.
Log into the NBG-460N Web Configurator and click VPN > Modify icon. This
1
displays the VPN Rule Setup (basic) screen.
NBG-460N User's Guide
Chapter 5 Tutorials
79