ZyXEL Communications NBG-4600N User Manual page 314

Chapter 27 Product Specifications and Wall-Mounting Instructions
Table 118 Hardware Features
Distance between the
centers of the holes
on the device's back.
Screw size for wall-
mounting
Table 119 Firmware Features
FEATURE
Default IP Address
Default Subnet Mask
Default Password
DHCP Pool
Wireless Interface
Default Wireless SSID
Default Wireless IP
Address
Default Wireless Subnet
Mask
Default Wireless DHCP
Pool Size
Device Management
Wireless Functionality
Firmware Upgrade
Configuration Backup &
Restoration
Network Address
Translation (NAT)
314
137 mm
M4 Tap Screw
DESCRIPTION
192.168.1.1
255.255.255.0 (24 bits)
1234
192.168.1.33 to 192.168.1.64
Wireless LAN
Wireless LAN: ZyXEL
Wireless LAN when WPS enabled: ZyXEL WPS
Wireless LAN: Same as LAN (192.168.1.1)
Wireless LAN: Same as LAN (255.255.255.0)
Wireless LAN: Same as LAN (32 from 192.168.1.33 to
192.168.1.64)
Use the Web Configurator to easily configure the rich range of
features on the NBG-460N.
Allows IEEE 802.11b and/or IEEE 802.11g and/or IEEE 802.11n
wireless clients to connect to the NBG-460N wirelessly. Enable
wireless security (WEP, WPA(2), WPA(2)-PSK) and/or MAC
filtering to protect your wireless network.
Note: The NBG-460N may be prone to RF (Radio
Frequency) interference from other 2.4 GHz devices
such as microwave ovens, wireless phones,
Bluetooth enabled devices, and other wireless LANs.
Download new firmware (when available) from the ZyXEL web
site and use the Web Configurator, an FTP or a TFTP tool to put
it on the NBG-460N.
Note: Only upload firmware for your specific model!
Make a copy of the NBG-460N's configuration and put it back
on the NBG-460N later if you decide you want to revert back to
an earlier configuration.
Each computer on your network must have its own unique IP
address. Use NAT to convert a single public IP address to
multiple private IP addresses for the computers on your
network.
NBG-460N User's Guide