ZyXEL Communications NBG-4600N User Manual page 137

You have one STB
You have one STB and one television. You can assign one port for your IPTV
connection and connect your STB to it.This effectively changes the IP address of
the LAN port to the IP address of the WAN port. In the following figure, you assign
port LAN 4 as the IPTV STB port. Video traffic (that you subscribed to) goes
directly to the STB without being routed to the LAN.
Figure 97 LAN 1 as IPTV STB Port
LAN 1
LAN 2
LAN 3
192.168.1.20
You have two STBs
Note: The following setup may not be applicable for all IPTV subscriptions. Some
service providers may not be able to support two video streams at the same
time. Contact your service provider for more information on this.
You have two STBs and two television sets. Two people want to watch different
programs on each TV. They also have separate IPTV subscriptions. Assign ports
LAN 3 and LAN 4 as IPTV STB ports. The IP addresses of LAN 3 and LAN 4 changes
to the same IP address as the WAN port. Connect the STBs to the ports. Video
traffic (that you subscribed to) goes directly to the STB without being routed to
the LAN.
Figure 98 LAN 3 and LAN 4 as IPTV STB Ports
LAN 1
LAN 2
192.168.1.20
NBG-460N User's Guide
TV
1.1.1.20
STB 1
TV 2
TV 1
1.1.1.20
Chapter 8 WAN
STB
STB 2
137