Dns Screen - ZyXEL Communications NBG-4600N User Manual

Use this screen to specify the interface/s from which you can upload the firmware
or configuration file to the NBG-460N and specify a secure client that can manage
the NBG-460N.
To change your NBG-460N's FTP settings, click Management > Remote MGMT
> FTP.
Figure 154 Management > Remote MGMT > FTP
The following table describes the labels in this screen.
Table 85 Management > Remote MGMT > FTP
LABEL
Server Port
Server Access
Secured Client
IP Address
Apply
Reset

18.7 DNS Screen

DNS (Domain Name System) maps a domain name to its corresponding IP
address and vice versa. Refer to the chapter on Connection Wizard chapter on
page 49 for background information.
Use this screen to define the interface/s from which the NBG-460N acquires its
DNS settings and specify a secure client that can manage the NBG-460N.
NBG-460N User's Guide
DESCRIPTION
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Select the interface(s) through which a computer may access the NBG-
460N using this service.
A secured client is a "trusted" computer that is allowed to communicate
with the NBG-460N using this service.
Select All to allow any computer to access the NBG-460N using this
service.
Choose Selected to just allow the computer with the IP address that
you specify to access the NBG-460N using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 18 Remote Management
251