Rule Configuration: User Defined Service Rule Configuration - ZyXEL Communications NBG-4600N User Manual

The following table describes the labels in this screen.
Table 78 Bandwidth Management Rule Configuration: Pre-defined Service
LABEL
#
Enable
Direction
Destination Port
Source Port
Protocol
OK
Cancel
17.5.2 Rule Configuration: User Defined Service Rule
Configuration
If you want to edit a bandwidth management rule for other applications or
services, click the Edit icon in the User-defined Service table of the Advanced
screen. The following screen displays.
Figure 150 Bandwidth Management Rule Configuration: User-defined Service Rule
Configuration
NBG-460N User's Guide
DESCRIPTION
This is the number of an individual bandwidth management rule.
Select an interface's check box to enable bandwidth management on
that interface.
These read-only labels represent the physical interfaces. Bandwidth
management applies to all traffic flowing out of the router through the
interface, regardless of the traffic's source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass
through the NBG-460N and be managed by bandwidth management.
This is the port number of the destination. See
for some common services and port numbers.
This is the port number of the source. See
some common services and port numbers.
This is the protocol (TCP or UDP) used for the service.
Click OK to save your customized settings.
Click Cancel to exit this screen without saving.
Chapter 17 Bandwidth Management
Appendix E on page 369
Appendix E on page 369 for
241