Bandwidth Management; Chapter 17 Bandwidth Management; Overview; What You Can Do - ZyXEL Communications NBG-4600N User Manual

C
H A P T E R

17.1 Overview

This chapter contains information about configuring bandwidth management and
editing rules.
ZyXEL's Bandwidth Management allows you to specify bandwidth management
rules based on an application.
In the figure below, uplink traffic goes from the LAN device (A) to the WAN device
(B). Bandwidth management is applied before sending the packets out to the
WAN. Downlink traffic comes back from the WAN device (B) to the LAN device
(A). Bandwidth management is applied before sending the traffic out to LAN.
Figure 146 Bandwidth Management Example
-> VOIP
-> FTP
-> HTTP
-> Chat, Email
A

17.2 What You Can Do

• Use the General screen
management and assign bandwidth values.
• Use the Advanced screen
managements rule for the pre-defined services and applications.
• Use the Monitor screen
network bandwidth that applications running in the network are using.
NBG-460N User's Guide

Bandwidth Management

(Section 17.4 on page
(Section 17.5 on page
(Section 17.6 on page
17
B
236) to enable bandwidth
238) to configure bandwidth
242) to view the amount of
235