Wireless Lan Advanced Screen; Quality Of Service (Qos) Screen - ZyXEL Communications NBG-4600N User Manual

7.6 Wireless LAN Advanced Screen

Click Network > Wireless LAN > Advanced. The screen appears as shown.
Figure 79 Network > Wireless LAN > Advanced
The following table describes the labels in this screen.
Table 35 Network > Wireless LAN > Advanced
LABEL
Roaming Configuration
Enable
Roaming
Wireless Advanced Setup
RTS/CTS
Threshold
Enable Intra-
BSS Traffic
Apply
Reset

7.7 Quality of Service (QoS) Screen

The QoS screen allows you to automatically give a service (such as e-mail, VoIP or
FTP) a priority level.
NBG-460N User's Guide
DESCRIPTION
Select this option if your network environment has multiple APs and you
want your wireless device to be able to access the network as you move
between wireless networks.
Data with its frame size larger than this value will perform the RTS
(Request To Send)/CTS (Clear To Send) handshake.
Enter a value between 256 and 2346.
A Basic Service Set (BSS) exists when all communications between
wireless clients or between a wireless client and a wired network client go
through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-
BSS is enabled, wireless client A and B can access the wired network and
communicate with each other. When Intra-BSS is disabled, wireless client
A and B can still access the wired network but cannot communicate with
each other.
Click Apply to save your changes back to the NBG-460N.
Click Reset to reload the previous configuration for this screen.
Chapter 7 Wireless LAN
111