Configuring Wifi Security On The Nbg - ZyXEL Communications NBG6515 User Manual

10.4.1 C o nfig uring WiFi Se c urity o n the NBG
This section shows you how to configure WiFi security settings with the following parameters on your NBG.
SSID
C ha nne l
Se c urity
Follow the steps below to configure the WiFi settings on your NBG.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
Open the
1
Wire le ss L AN 2.4G / 5G > G e ne ra l
Enable
2
Wire le ss L AN
Enter
3
SSID_Exa m ple 3
field to have the NBG scan for and select an available channel automatically.
Se le c tio n
Set security mode to
4
Click .
Apply
Tutorial: Network > Wireless LAN 2.4G/5G > General
Fig ure 58
Open the
5
Sta tus
the WLAN connection is up under
Chapter 10 Tutorials
SSID_Example3
Auto
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
.
as the SSID and select the
and enter
WPA- PSK
screen. Verify your WiFi and WiFi security settings under
Inte rfa c e Sta tus
NBG6515 User's Guide
screen in the AP's Web Configurator.
Auto C ha nne l Se le c tio n
T hisism yWPA- PSKpre - sha re dke y
.
74
Section 3.2 on page 26).
check box in the
C ha nne l
in the
Pre - Sha re d Ke y
and check if
De vic e Info rm a tio n
field.