ZyXEL Communications NBG-4600N User Manual page 286

Chapter 21 Logs
Table 106 802.1X Logs (continued)
LOG MESSAGE
Local User Database does not
support authentication method.
No response from RADIUS. Pls
check RADIUS Server.
Use Local User Database to
authenticate user.
Use RADIUS to authenticate user. The RADIUS server is operating as the
No Server to authenticate user.
Local User Database does not
find user`s credential.
Table 107 ACL Setting Notes
PACKET
DIRECTION
(L to W)
(W to L)
(L to L/P)
(W to W/P)
Table 108 ICMP Notes
TYPE
0
3
4
286
DIRECTION
LAN to WAN
WAN to LAN
LAN to LAN/
NBG-460N
WAN to WAN/
NBG-460N
CODE DESCRIPTION
Echo Reply
Echo reply message
0
Destination Unreachable
Net unreachable
0
Host unreachable
1
Protocol unreachable
2
Port unreachable
3
A packet that needed fragmentation was dropped because it was set
4
to Don't Fragment (DF)
Source route failed
5
Source Quench
DESCRIPTION
A user tried to use an authentication method that
the local user database does not support (it only
supports EAP-MD5).
There is no response message from the RADIUS
server, please check the RADIUS server.
The local user database is operating as the
authentication server.
authentication server.
There is no authentication server to authenticate
a user.
A user was not authenticated by the local user
database because the user is not listed in the
local user database.
DESCRIPTION
ACL set for packets traveling from the LAN to the
WAN.
ACL set for packets traveling from the WAN to the
LAN.
ACL set for packets traveling from the LAN to the
LAN or the NBG-460N.
ACL set for packets traveling from the WAN to the
WAN or the NBG-460N.
NBG-460N User's Guide