Connection Wizard: Step 3: Internet Configuration - ZyXEL Communications NBG-4600N User Manual

The following table describes the labels in this screen.
Table 13 Wizard Step 2: Extend (WPA-PSK or WPA2-PSK) Security
LABEL
Pre-Shared
Key
Back
Next
Exit
4.4 Connection Wizard: STEP 3: Internet
Configuration
The NBG-460N offers three Internet connection types. They are Ethernet, PPP
over Ethernet or PPTP. The wizard attempts to detect which WAN connection
type you are using. If the wizard does not detect a connection type, you must
select one from the drop-down list box. Check with your ISP to make sure you use
the correct type.
This wizard screen varies according to the connection type that you select.
Figure 26 Wizard Step 3: ISP Parameters.
NBG-460N User's Guide
DESCRIPTION
You can set up the most secure wireless connection by configuring WPA in
the wireless LAN screens. You need to configure an authentication server to
do this.
• Choose ASCII and type from 8 to 63 case-sensitive ASCII characters.
• Choose HEX and type a key of up to 64 HEX characters.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
Chapter 4 Connection Wizard
55