Using Ap + Bridge Mode And Wds - ZyXEL Communications NBG-4600N User Manual

Chapter 5 Tutorials
Check the status of your wireless connection in the screen below. If your wireless
7
connection is weak or you have no connection, see the Troubleshooting section of
this User's Guide.
Figure 44 Link Status
If your connection is successful, open your Internet browser and enter
8
www.zyxel.com
able to access the web site, your wireless connection is successfully configured.

5.2.4 Using AP + Bridge Mode and WDS

Note: You need at least one other NBG-460N to form a bridge connection.
The NBG-460N can be used as an access point that can also communicate with
other access points (bridge mode).
In the following figure, you want your notebook (B) to be able to open a file
located on the File Server. The File Server is connected to another NBG-460N
(Y). You can create a bridge connection between Y and your NBG-460N (Z) by
configuring both in AP + Bridge mode and entering the MAC addresses of the
other NBG-460N in the WDS Setup field.
74
or the URL of any other web site in the address bar. If you are
http://
NBG-460N User's Guide