ZyXEL Communications NBG-4600N User Manual page 58

Chapter 4 Connection Wizard
Note: The NBG-460N supports one PPTP server connection at any given time.
Figure 29 Wizard Step 3: PPTP Connection
The following table describes the fields in this screen
Table 16 Wizard Step 3: PPTP Connection
LABEL
ISP Parameters for Internet Access
Connection Type
User Name
Password
PPTP Configuration
Server IP
Address
Connection ID/
Name
Get
automatically
from ISP
Use fixed IP
address
My IP
Address
58
DESCRIPTION
Select PPTP from the drop-down list box. To configure a PPTP client,
you must configure the User Name and Password fields for a PPP
connection and the PPTP parameters for a PPTP connection.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Type the IP address of the PPTP server.
Enter the connection ID or connection name in this field. It must follow
the "c:id" and "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your ISP.
Select this radio button if your ISP did not assign you a fixed IP
address.
Select this radio button, provided by your ISP to give the NBG-460N a
fixed, unique IP address.
Type the (static) IP address assigned to you by your ISP.
NBG-460N User's Guide