Technical Reference; Using Upnp In Windows Xp Example - ZyXEL Communications NBG-4600N User Manual

The following table describes the labels in this screen.
Table 87 Management > UPnP > General
LABEL
Enable the Universal Plug
and Play (UPnP) Feature
Allow users to make
configuration changes
through UPnP
Allow UPnP to pass
through Firewall
Apply
Reset

19.5 Technical Reference

The sections show examples of using UPnP.

19.5.1 Using UPnP in Windows XP Example

This section shows you how to use the UPnP feature in Windows XP. You must
already have UPnP installed in Windows XP and UPnP activated on the NBG-460N.
Make sure the computer is connected to a LAN port of the NBG-460N. Turn on
your computer and the NBG-460N.
19.5.1.1 Auto-discover Your UPnP-enabled Network Device
Click start and Control Panel. Double-click Network Connections. An icon
1
displays under Internet Gateway.
NBG-460N User's Guide
Chapter 19 Universal Plug-and-Play (UPnP)
DESCRIPTION
Select this check box to activate UPnP. Be aware that anyone
could use a UPnP application to open the Web Configurator's
login screen without entering the NBG-460N's IP address
(although you must still enter the password to access the Web
Configurator).
Select this check box to allow UPnP-enabled applications to
automatically configure the NBG-460N so that they can
communicate through the NBG-460N, for example by using
NAT traversal, UPnP applications automatically reserve a NAT
forwarding port in order to communicate with another UPnP
enabled device; this eliminates the need to manually configure
port forwarding for the UPnP enabled application.
Select this check box to allow traffic from UPnP-enabled
applications to bypass the firewall.
Clear this check box to have the firewall block all UPnP
application packets (for example, MSN packets).
Click Apply to save the setting to the NBG-460N.
Click Reset to begin configuring this screen afresh.
255