Setting Your Nbg-418N V2 To Client Bridge Mode - ZyXEL Communications NBG-418N v2 User Manual

Table 15 Menu: Universal Repeater Mode (continued)
L INK
WLAN
LAN
Maintenance
System
Logs
Tools
Sys OP Mode
Language
4.5 Se tting yo ur NBG - 418N v2 to C lie nt Bridg e Mo de
Connect your computer to the LAN port of the NBG-418N v2.
1
The default LAN IP address of the NBG-418N v2 is 192.168.1.1 in router mode and 192.168.1.2 by default in
2
non-router mode.
After you've set your computer's IP address, open a web browser such as Internet Explorer and type the
3
IP address of the NBG-418N v2 as the web address in your web browser.
Log into the Web Configurator. See the
4
Go to Ma inte na nc e > Sys O P Mo de > G e ne ra l
5
Chapter 4 Modes
T AB FUNC T IO N
AP Select Use this screen to choose an access point that you want the NBG-418N v2 to
connect to. You should know the security settings of the target AP.
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG-418N v2 to block access to
devices or block the devices from accessing the NBG-418N v2.
Advanced This screen allows you to configure advanced wireless settings.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
MBSSID Use this screen to configure multiple SSIDs on the NBG-418N v2.
IP Use this screen to configure LAN IP address and subnet mask.
General Use this screen to view and change administrative settings such as system
and domain names, password and inactivity timer.
Time Setting Use this screen to change your NBG-418N v2's time and date.
View Log Use this screen to view the logs for the categories that you selected.
Firmware Use this screen to upload firmware to your NBG-418N v2.
Configuration Use this screen to backup and restore the configuration or reset the factory
defaults to your NBG-418N v2.
Restart This screen allows you to reboot the NBG-418N v2 without turning the power
off.
General This screen allows you to select the device operating mode:
Po int , Unive rsa l Re pe a te r
Language This screen allows you to select the language you prefer.
Chapter 2 on page 16
NBG-418N v2 User's Guide
or C lie nt Bridg e
for instructions on how to do this.
and select C lie nt Bridg e
42
Ro ute r ,
.
.
Ac c e ss