Table of Contents
Advertisement
Table 8 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode) (continued)
LABEL
MLD Proxy
Enable
Apply as
Default
Gateway
IPv6 DNS Server
This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the IPv4/IPv6 Mode field.
Configure the IPv6 DNS server in the following section.
Obtain IPv6
DNS Info
Automatically
Use Following
Static IPv6 DNS
Address
Primary DNS
Server
Secondary DNS
Server
Apply
Cancel
6.2.1.2 Bridge Mode
Figure 24 Click the Add new WAN Interface in the Network Setting > Broadband screen or
the Edit icon next to the connection you want to configure. Select Bridge as the encapsulation
mode. Network Setting > Broadband > Add New WAN Interface/Edit (Bridge Mode)
The following table describes the fields in this screen.
Table 9 Network Setting > Broadband > Add New WAN Interface/Edit (Bridge Mode)
LABEL
General
Name
Type
Mode
Chapter 6 Broadband
DESCRIPTION
Select this checkbox to have the GPON Device act as an MLD proxy on this connection. This
allows the GPON Device to get subscription information and maintain a joined member list
for each multicast group. It can reduce multicast traffic significantly.
Select this option to have the GPON Device use the WAN interface of this connection as the
system default gateway.
Select Obtain IPv6 DNS Info Automatically to have the GPON Device get the IPv6 DNS
server addresses from the ISP automatically.
Select Use Following Static IPv6 DNS Address to have the GPON Device use the IPv6
DNS server addresses you configure manually.
Enter the first IPv6 DNS server address assigned by the ISP.
Enter the second IPv6 DNS server address assigned by the ISP.
Click Apply to save your changes back to the GPON Device.
Click Cancel to exit this screen without saving.
DESCRIPTION
Enter a service name of the connection.
This shows it is a GPON connection.
Select Bridge when your ISP provides you more than one IP address and you want the
connected computers to get individual IP address from ISP's DHCP server directly. If you select
Bridge, you cannot use routing functions, such as QoS, Firewall, DHCP server and NAT on
traffic from the selected LAN port(s).
PMG5317-T20A User's Guide
80
Advertisement
Table of Contents
