Sony XDS-1000 Operation Manual page 33

HD video monitor
HDW-M2000/M2000P
(recorder)
HD video monitor
Settings on each unit
Device
HDW-M2000/M2000P (recorder)
BVE-700/700A (editing control unit)
This unit (player)
Setting of VTR constants
When connecting an editing control unit (BVE-700/700A/
2000) to use with this unit, set VTR constants as follows.
System frequency
59.94i/59.94P/29.97P
50i/50P/25P
23.98P
To HD-SDI input connector
To HD-SDI input
connector
Settings
• REMOTE 1 (9P) button: Lit
• REF.VIDEO INPUT connector 75 Ω termination switch: OFF
• Audio selection function switching button
INPUT button: HDSDI
• Function menu HOME >F1 (VID. IN): SDI
• Function menu page 1 >F1 (TCG): INT
• Function menu page 1 >F2 (PR/RGN): PRESET
• Function menu page 1 >F3 (RUN): FREE
• SYNCHRONIZE menu: OFF
• VTR constants (see below)
• Setup menu item 208 PROTOCOL FOR REMOTE(9P): VTR
• REMOTE button (for playback port): Lit
VTR constant
1 2 3 4 5
A0 B0 00 96 07
A1 B0 00 7D 07
A2 B0 00 78 07
1: 75 Ω coaxial cable (not supplied)
2: 9-pin remote control cable (not supplied)
6 7 8 9 10
07 03 80 0A 07
07 03 80 0A 07
07 03 80 0A 07
Reference video signal
This unit (player)
BVE-700/700A
(editing control unit)
11 12 13 14 15
FE 00 80 5A FF
FE 00 80 4C FF
FE 00 80 48 FF
Connections and Settings
16
5A
4B
48
33