Sony XDS-1000 Operation Manual page 92

Meanings of indications on the menu
screen
On-screen indication
Right-pointing arrow
(c) at the right of a
menu item
Left-pointing arrow (C)
at the left of a menu
item
Character string at the
right of a menu item
An * (asterisk) in a
complete list of settings
To change a menu item setting
Carry out the following operations to change the setting.
For information about how to change network settings see
next section "To change network settings".
MENU button
Function buttons
PAGE/HOME button
1
Use the PUSH SET knob or the V and v buttons to
select the required item, then press the PUSH SET
knob or the SELECT function button (F2).
The sub-items of the selected item appears.
2
Select a sub-item with the same operation as step 1,
and use the PUSH SET knob or the V and v buttons to
change the setting.
3
Press the PUSH SET knob or the SELECT function
button (F2) to confirm the setting change.
4
Press the SAVE function button (F5).
92
Maintenance Menu
Meaning
Pressing the PUSH SET knob or
the b button switches to the next
lower menu level or to a setting
selection screen.
Pressing the PUSH SET knob or
the B button switches to the
previous (higher) menu level.
Current setting of the menu item
When shown with a colon (:):
the current setting is the same
as the factory default setting.
When shown with a raised dot
(.): the current setting is
different from the factory
default setting.
Factory default setting
Arrow buttons
PUSH SET knob
SHIFT button
The message "NOW SAVING..." appears on the video
monitor screen, while the new settings are saved in
memory. When the saving operation is completed, the
video monitor screen returns to its normal indications.
To cancel changing a setting
Before pressing the SAVE function button (F5), press the
MENU button.
The menu disappears from the video monitor screen,
without saving the new setting.
To change network settings
To change network settings, carry out the procedure
described in the previous section, "To display the
maintenance menu", to display the NETWORK menu
item, then carry out the following operations.
For details of the settings, consult your network
administrator.
When the IP address is assigned automatically
Note
Check that the network cable is connected to this unit
before carrying out the operation.
1
Set maintenance menu item M5: NETWORK
>M50: DHCP to "ENABLE".
2
In the NETWORK menu, press the SAVE function
button (F5).
3
When the "NOW SAVING..." message vanishes,
power the unit off and then on again with the on/
standby button.
To check the assigned IP address
Select maintenance menu item M5: NETWORK
>M51: IP ADDRESS.
Note
If the IP address cannot be assigned, this is shown as
"000.000.000.000." In this case, consult the network
administrator.
To set the IP address
First set DHCP to "DISABLE" (see the previous section,
"When the IP address is assigned automatically").
1
Select maintenance menu item M5: NETWORK
>M51: IP ADDRESS.
2
Press the PUSH SET knob.
The IP address appears, and the digit that can be
changed flashes.