Sony XDS-1000 Operation Manual page 99

Alarm message in status
display area
Exit THUMBNAIL mode!
Internal Storage Only!
REMOTE!
No Media!
Operation isn't supported
for this MEDIA.
PORT SELECT mismatch. This appears when you have selected an SxS memory card as media and have attempted to
During recording operations
Alarm message in status
display area
Input Sig!
ILL. REC!
MEM. Full!
During playback operations
Alarm message in status
display area
ILL. PLAY!
MEM. Empty!
This Clip cannot be Played
back.
Alarms related to operations in the clip list screen / copy operations
Alarm message in clip
list screen
Clip is Locked.
Copy Running!
Internal Error
Not Supported Format.
Copy Aborted.
Some Clips are Locked.
Description/action
This appears when an attempt is made to change media while the clip list screen is displayed.
Switch to the basic operation screen or the video monitor screen and try the operation again.
This appears when an attempt is made to carry out a recording operation on a memory card.
Press the REMOTE button, turning it off, to put this unit into local control mode.
Try again after loading an SxS memory card.
This appears when an attempt is made to play material on a memory card.
This appears when you have selected an SxS memory card as media and have attempted to
specify the index picture by pressing the INDEX function button (F1) on page P5 OTHER of the
function menu.
specify the index picture by pressing the INDEX function button (F1) on page P5 OTHER of the
function menu.
Alarm message in video monitor screen Description/action
VIDEO INPUT SIGNAL DOES NOT
MATCH SYSTEM SETUP.
ENCODING DOES NOT SYNCHRONIZE
WITH REF VIDEO.
MEMORY FULL !!
Alarm message in video monitor screen Description/action
ILLEGAL PLAYBACK.
MEMORY EMPTY !!
–
Description/action
The clip is locked.
This appears when an attempt is made to delete a clip, or set or clear a clip flag when the clip is
locked.
A copy operation is being performed, so another copy operation is not allowed.
The target operation failed because of generation of an internal error.
The format is not supported by this unit, so copy operation is impossible.
The copy operation was aborted.
Some of the selected clips are locked (protected).
This appears when the signal that does not
correspond to the system frequency or the number of
lines set in this unit is being input, or when HD-SDI is
selected as a video input signal while setting the SD
signal recording.
Input a signal that matches the system frequency, or
change this unit's system frequency setting (see
page 37).
Check the signals being input to this unit.
Recording on a media is not possible because a
buffer overflow has occurred in the recording buffer
memory.
Normal playback is not possible.
Playback is not possible because a buffer underflow
has occurred in the playback buffer memory.
This clip cannot be played back because its format is
not supported by this unit.
99
Troubleshooting