Sony XDS-1000 Operation Manual page 77

Menu items in the 600s, relating to the timecode, metadata, and UMID
Item number Item name
605 TCG REGEN MODE
607 U-BIT BINARY GROUP FLAG
618 UPCONV EMBEDDED VITC
a)
619 VITC
638 TIME CODE FOR VDCP CONTROL Make a setting for timecode generated when the REC INIT command or
651 UMID SDI OUTPUT
652 UMID SD VANC LINE
Settings
Select the signal to be regenerated when the timecode generator is in the
regeneration mode.
TC&UB: Both the timecode and user bits are regenerated.
TC: Only the timecode is regenerated.
UB: Only the user bits are regenerated.
Select the user bits to be used in the timecode generated by the
timecode generator.
000:not specified [000]: Character set not specified.
001:iso character [001]: 8-bit characters compliant with ISO 646 and
ISO 2022.
010:unassigned-1 [010]: Undefined.
011:unassigned-2 [011]: Undefined.
100:unassigned-3 [100]: Undefined.
101:page / line [101]: SMPTE-262M page/line multiplex system.
110:unassigned-4 [110]: Undefined.
111:unassigned-5 [111]: Undefined.
a)
Select the source of the VITC embedded into output HD-SDI signal when
up converting during playback of an SD clip.
VITC: Select the VITC of the SD clip.
LTC: Select the LTC of the SD clip.
Select whether to record the VITC generated by the internal timecode
generator during IMX recording.
off: Do not record the internally generated VITC.
on: Record the internally generated VITC.
Note
Even if this item is set to "off", VITC is recorded if the input video signal
contains VITC and the VITC line is set to "throu" in menu item 723.
CUE WITH DATA command is executed from a VDCP-compliant
controller.
REC:VDCP PB:TC [VDCP]: Recording timecode is continuous timecode
starting from 00:00:00:00 generated in accordance with the VDCP
controller. Timecode for cueing is the same as clip timecode.
REC:TCG PB:TC [menu]: Timecode for recording depends on the
settings of the menu items related to the timecode generator.
Timecode for cueing is the same as clip timecode.
REC:VDCP PB:Zero Base [VDCP/0]: Recording timecode is continuous
timecode starting from 00:00:00:00 generated in accordance with the
VDCP controller. Timecode for cueing is generated taking
00:00:00:00 as the timecode value of the clip's first frame.
REC:TCG PB:Zero Base [menu/0]: Timecode for recording depends on
the settings of the menu items related to the timecode generator.
Timecode for cueing is generated taking 00:00:00:00 as the
timecode value of the clip's first frame.
Select whether to output UMID in the VANC of the SDI output.
off: Do not output.
on: Output.
See "Using UMID Data" (page 106) for more information about UMID.
a)
Select the line in which UMID is output when menu item 651 is set to
"on".
12H, 13H, 15H, 16H, 17H, 18H, 19H (59.94i/59.94P/29.97P mode)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (50i/50P/25P mode)
See "Using UMID Data" (page 106) for more information about UMID.
77
Setup Menu