Sony XDS-1000 Operation Manual page 84

Item number Item name
930 DOWN CONVERTER MODE
931 DOWN CONVERTER LETTER BOX
a)
MODE
932 H CROP POSITION (DC)
934 CROSS COLOR (DC)
935 DETAIL GAIN (DC)
936 LIMITER (DC)
937 CRISP (DC)
938 LEVEL DEPEND THRESHOLD
a)
(DC)
939 H DETAIL FREQUENCY (DC)
940 H/V RATIO (DC)
942 V FILTER SELECT (DC)
943 CROSS COLOR CRISP (DC)
950 UP CONVERTER MODE
951 H CROP POSITION (UC)
952 LETTER BOX POSITION (UC)
953 UP CONVERTER PROCESS
84
Setup Menu
Menu items in the 900s, relating to digital process
Settings
a)
Select the down-converter mode.
EDGE CROP [CROP]: Select the edge crop mode.
LETTER BOX [L-BOX]: Select the letter box mode.
SQUEEZE [SQUEZ]: Select the squeeze mode.
Select the aspect ratio of the down-converter output when menu item
930 is set to "LETTER BOX".
16:9: Set the aspect ratio of the HD-SD converter output to 16:9.
14:9: Set the aspect ratio of the HD-SD converter output to 14:9.
13:9: Set the aspect ratio of the HD-SD converter output to 13:9.
a)
Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the down-converter output when menu item 930 is set to
"EDGE CROP".
–120 to 0 to 120
a)
Adjust the down-converter cross color.
0 to 8 to 15
a)
Adjust the down-converter image enhancer. Adjust the sharpness of
edge enhancement.
0 to 7FH
a)
Adjust the down-converter image enhancer. Set the maximum detail level
added to emphasize the original signal.
0 to 20H to 3FH
a)
Adjust the down-converter image enhancer. Set the threshold amplitude
for emphasis (signals of amplitude lower than the threshold are not
emphasized).
0 to FH
Adjust the down-converter image enhancer. Set the luminance range for
edge enhancement.
0 to 8 to FH
a)
Adjust the down-converter image enhancer. Set the central frequency for
edge enhancement.
2.6MHz, 3.4MHz, 3.9MHz, 4.6MHz
a)
Adjust the down-converter image enhancer. Set the horizontal/vertical
ratio for edge enhancement.
0 to 3 to 7
a) c)
Set the vertical interpolation filter coefficient for down-converter output (in
1080 mode only).
If the setting value is large, the vertical resolution is high.
1 to 3
a)
Set the cross color crisp level for down-converter output.
0 to 4 to FH
a)
Select the up-converter mode.
EDGE CROP [CROP]: Select the edge crop mode.
LETTER BOX [L-BOX]: Select the letter box mode.
SQUEEZE [SQUEZ]: Select the squeeze mode.
a)
Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the up-converter output when menu item 950 is set to "EDGE
CROP".
–120 to 0 to 120
a)
When menu item 950 is set to "LETTER BOX", adjust the vertical
location of the position where the picture is cut out for up-converter
output in letter box mode.
–120 to 0 to 120
a)
Select the source picture to use in converting SD to HD.
FIELD: Use field pictures.
ADAPTIVE [ADAPT]: Frame or field is selected automatically.