Sony XDS-1000 Operation Manual page 90

Item
M3B: VANC RX M3B0: VANC RX
PARAMETER PACKET
Sub-item
1
2
3
M3B1: LINE1 SEL
M3B2: LINE2 SEL
M3D: DATE/TIME PRESET
M3F: FACTORY SETUP
Item
M40: EXTENDED MENU
M49: RESET ALL SETUP
Item
M50: DHCP
90
Maintenance Menu
M3: OTHERS: Other setting items
Setting
For setting HD-SDI VANC data input parameters
Notes
• In 59.94i, 50i, 29.97P or 25P mode, selecting the line also selects the
corresponding line in the second field (for example, if line 9 is selected, line 572
is also selected for VANC packet reception).
• Menu item M3B0 enables recording of one VANC packet when the selected
line contains any packets whose DID/SDID matches the value set with this
menu item.
• Up to four packets are recorded per each line regardless of the DID and SDID
for the VANC set with menu item M3B1 or M3B2.
• It is not possible to set the same line with menu items M3B0, M3B1, and M3B2.
If the same line is specified, priority is given in the order of M3B0, M3B1, and
M3B2 (for example, if the same line is specified with M3B0 and M3B1, the
setting with M3B1 is ignored).
• When VANC data is output to HD-SDI playback signals, the number of the
output VANC line is the same as that of the input VANC line.
• When a UMID or essence mark line is selected with M3B1 or M3B2, UMID or
essence mark output takes priority. To disable UMID or essence mark output,
set setup menu item 651 or 657 to "off".
LINE Selects the LINE for the VANC to be received.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
DID Specification of the DID of the VANC to receive
00h-FFh
SDID Specification of the SDID of the VANC to receive
00h-FFh
Selects the LINE to be received for the HD-SDI VANC data.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
Selects the LINE to be received for the HD-SDI VANC data.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
Specifies the year, month, day, time, and time zone.
For details, refer to the Maintenance Manual.
M4: SETUP MAINTENANCE: Items relating to the setup menu
Setting
Select whether to display the extended menu.
DISABLE [dis]: Do not display.
ENABLE [ena]: Display.
Reset all the menu settings to the factory settings.
Push the SAVE function button (F5): Reset.
Push the MENU button: Return to the next highest menu level without resetting.
Notes
• The system frequency setting is also cleared. If you execute this item, reset the
system frequency (see page 29).
• Date and time settings are not cleared, but the time zone setting is cleared.
After executing this item, reset the time zone (see page 29).
M5: NETWORK: Items relating to network settings
Setting
Set whether to assign an IP address automatically with the DHCP server.
DISABLE [dis]: Do not assign automatically.
ENABLE [ena]: Assign automatically.