P1 Input Page; P2 Input Page - Sony XDS-1000 Operation Manual

Professional media station
Hide thumbs Also See for XDS-1000:
Table of Contents

Advertisement

Item
Setting
F5: MONITR R
Selects the channel to monitor as the
right monitor channel.
CH1, CH2, CH3, CH4, CH5, CH6, CH7,
CH1/2, CH3/4, CH5/6, CH7/8 (MIX)
F6: OUT REF
Selects the reference signal for the
output signals of this unit.
REF: Use the signal input to the REF.
INPUT: Use the input video signal as the
a) This is displayed only when TCG on page P4 TC of the function menu is
set to "INT", and PRST/RGN is set to "PRESET".

P1 INPUT page

Item
Setting
F1: INT SG
Set whether to select test signal from
internal signal generator.
OFF: Do not select.
ON: Select.
F2: V INPUT
Selects the video input signal.
HDSDI: HD-SDI signal
SDSDI: SD-SDI signal
DVB-ASI: DVB-ASI TS signal
Notes
• Test signal is input when INT SG on
this page is set to "ON" and setup
menu item 710 is set to anything other
than "off".
• When the system frequency is 23.98P,
the setting is fixed "HDSDI".
• When "DVB-ASI" is selected, the
setting for audio input signal is fixed to
"DVB-ASI".
F3: A1 INPUT
Selects the audio input signal to assign
to audio channel 1.
SDI: Audio signal embedded into SDI
ANALOG1: Input signal to the ANALOG
AES/EBU1: Signal input to the DIGITAL
DVB-ASI: DVB-ASI TS signal
Note
Test signals are input to all audio
channels 1 to 8 when INT SG on this
page is set to "ON" and setup menu item
808 is set to anything other than "off".
F4: A2 INPUT
Selects the audio input signal to assign
to audio channel 2.
SDI: Audio signal embedded into SDI
ANALOG2: Input signal to the ANALOG
AES/EBU2: Signal input to the DIGITAL
DVB-ASI: DVB-ASI TS signal
42
Basic Operations of the Function Menu
CH8
VIDEO INPUT connector as the
output reference signal.
output reference signal.
a)
signal
AUDIO INPUT 1 connector
AUDIO (AES/EBU) IN 1/2
connectors
a)
signal
AUDIO INPUT 2 connector
AUDIO (AES/EBU) IN 1/2
connectors
a)
Item
Setting
F5: A3 INPUT
Selects the audio input signal to assign
to audio channel 3.
SDI: Audio signal embedded into SDI
signal
ANALOG1: Input signal to the ANALOG
AUDIO INPUT 1 connector
AES/EBU3: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 3/4
connectors
DVB-ASI: DVB-ASI TS signal
F6: A4 INPUT
Selects the audio input signal to assign
to audio channel 4.
SDI: Audio signal embedded into SDI
signal
ANALOG2: Input signal to the ANALOG
AUDIO INPUT 2 connector
AES/EBU4: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 3/4
connectors
DVB-ASI: DVB-ASI TS signal
a) When the maintenance menu item M22: OPTION SETTING >DVB-ASI
is set to "ON" with the optional PDBK-202 being installed (see page 88).

P2 INPUT page

Item
Setting
F1: A5 INPUT
Selects the audio input signal to assign
to audio channel 5.
SDI: Audio signal embedded into SDI
signal
ANALOG1: Input signal to the ANALOG
AUDIO INPUT 1 connector
AES/EBU5: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 5/6
connectors
DVB-ASI: DVB-ASI TS signal
F2: A6 INPUT
Selects the audio input signal to assign
to audio channel 6.
SDI: Audio signal embedded into SDI
signal
ANALOG2: Input signal to the ANALOG
AUDIO INPUT 2 connector
AES/EBU6: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 5/6
connectors
DVB-ASI: DVB-ASI TS signal
F3: A7 INPUT
Selects the audio input signal to assign
to audio channel 7.
SDI: Audio signal embedded into SDI
signal
ANALOG1: Input signal to the ANALOG
AUDIO INPUT 1 connector
AES/EBU7: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 7/8
connectors
DVB-ASI: DVB-ASI TS signal
a)
a)
a)
a)
a)

Advertisement

Table of Contents
loading

Table of Contents